Hello all,
on my 996 Facelift, BJ 2002, the airbag lamp in the instrument cluster suddenly burns.
The airbag control unit I had already sent away for testing, everything ok.
The instrument cluster was also repaired, a few errors fixed, now everything is ok again.
Nevertheless the lamp burns 
In the PZ with Piwis read out, result in the appendix.
Maybe someone can help me,
Greetings Dirk
This post has been automatically translated.
Hallo limpi,
Schau mal hier: Airbag lamp
Dort wird jeder fündig! :-)
Well, it says everything: Interruption
Why don't you have it done at the service center while you're there?
Go through each airbag, the part has not so many, where I would start with the steering wheel.
Workshops have airbag dummies and so quickly find the error.
This post has been automatically translated.
I would use the probability. The coil spring is the only moving part on the airbags and it tends to come off. I had the advantage in my search that I could build the parts from the GT3 into the Boxster for testing.
Greetz
This post has been automatically translated.
In the pz told me the instrument cluster would be defective, he can not determine anything else.
Then I buy myself such a dummy, costs not the world.
What is the purpose of this dummy?
This post has been automatically translated.
Uuuuand whether the wiring is in order 
This post has been automatically translated.
ok, thank you
This post has been automatically translated.
I also had with 997 and 996.
It's the stupid resistors that are onboard in the belt system and always break.
In the 997 it was the belt whip passenger
On the 996 it was the seatbelt reel passenger
Repair impossible - part must be completely replaced because non-destructive not to change - sometimes there are tinkering solutions where you solder resistors into the airbag cable system - I find the airbag system from net nice ...
This post has been automatically translated.
Moin,
unplugged all airbags one after the other, read out, and each time got the corresponding airbag displayed as an error.
Plugged in the simulator, error deleted, no longer appeared.
Same with the seat belt buckles, unplugged, error displayed, plugged in simulator, error could be cleared.
I measured the cables from the control unit to the speedometer, they are connected.
All this has brought nothing, except the suspicion that it is perhaps the control unit.
And the airbag light is still on.
Have the cheeks thick
This post has been automatically translated.
